How to Sight in an ATN Night Vision Scope – Quick Guide of 2023

I have a lot of friends who have night vision scopes, and I was very curious about how they worked and functioned. And when I came across how to sight in ATN night vision scopes on a YouTube video that I liked and decided to read up on them, and I found a lot of information about ATN scopes that I found interesting.

I decided it would be a good idea to write a guide about how to sight in an ATN scope because many people were asking me questions about it.

Today, we’ll look at what makes an ATN night vision scope, how to sight in an ATN night vision scope, and what you’ll need to start your night vision journey.

How to Sight in an ATN Night Vision Scope

1. Attach the Night Vision Scope to the Rifle

By inserting the barrel into the receiver and screwing it in place. It should not be too tight, but tight enough to hold it in place.

Next, attach the battery pack to the front of the receiver with the clip. If you are using a red-dot sight, attach it now. If you are not, leave it off until you get your first shot. You can now start firing. Make sure you keep the sights on the target. Adjust the scope as needed to hit the center of the target.

2. Align the Optic and the Aiming Point (AIM) Reticle

Hold the rifle steady at eye level. The scope will be adjusted to zero the weapon. Adjust the elevation of the scope until you can see a small dot in the center of the crosshairs. This is your aim point.

Next, adjust the windage (i.e. left or right) until you can see the dot move in relation to the crosshairs. This is your holdover, turn on the power to the scope. Focus the crosshairs on the AIM point.

3. Adjust the elevation and windage

Adjust the elevation and windage of the rifle using the appropriate sight adjustment tools. The first thing to do is to verify that the gun is zeroed properly. The rear sight can be adjusted by hand, but this requires a steady hand.

If the rear sight is not centered in the receiver, it will not move as you adjust it. It should be noted that if the rear sight is set up correctly, there will be no need to adjust the windage setting.

4. Aim and shoot

Now, shoot at the point where you mark your aim. But remember to be successful with a bow, you need to aim and shoot. The best way to do this is to practice regularly.

5. Learn to use your night vision scope

Using a night vision scope can be a very useful tool for hunting or camping. You can use it to see in the dark or to see things that are difficult to see with normal vision.

6. How To Find the Aiming Point (AIM)

The AIM system is used for aiming a weapon in 3D space. It can be used to aim with weapons like guns, sniper rifles, and missiles.

You will need to find the Aiming Point of the weapon in order to aim it. In order to find the Aiming Point of a weapon you have to first locate the weapon’s Aimpoint. The Aimpoint is the small red dot on the top center of the weapon’s scope.

7. How To Determine the Reticle Size

Sight The reticle size of a sight is determined by the number of windage and elevation adjustments that are available on the sight. The more windage and elevation adjustments that are available, the larger the reticle will be.

However, the reticle size is normally shown in millimeters on the front or rear of the sight and can be read off from the scale printed on the sight. The first step to determining the reticle size of a sight is to find the elevation adjustment range of the sight. You may have to check the sight manual to find this information.

8. Night Vision Scope Settings

The Night Vision Scope settings on your rifle are the same as with a regular scope. The difference is that you have to use a special eyepiece for night vision devices. You will need a red filter or a yellow filter in front of the eyepiece. In addition, you may need a red filter in the back of the eyepiece. If you don’t have these filters, you will have to buy them.

9. Using the night vision scope

There are a few ways to use the night vision scope. One way is to use it to look at things in the dark. Another way is to use it to see things that are far away.

How to use the ATN night vision scope?

The ATN night vision scope is a powerful device that will allow you to see through the dark with amazing clarity. You can also use it in conjunction with the flashlight to illuminate your area of interest. To use it, simply pull out the lens and turn on the power switch.

You can then point the scope in the direction you want to look. The screen will illuminate and display whatever you are looking at. If you do not wish to use the scope in this manner, simply turn it off and keep it in the closed position.

How To Find the Aiming Point?

The AIM system is used for aiming a weapon in 3D space. It can use to aim with weapons like guns, sniper rifles, and missiles. You will need to find the Aiming Point of the weapon in order to aim it.

To find the Aiming Point of a weapon, you have to first locate the weapon’s Aimpoint. The Aimpoint is the small red dot on the top center of the weapon’s scope.

How To Determine the Reticle Size?

Sight The reticle size of sight is determined by the number of windage and elevation adjustments that are available on sight. The more windage and elevation adjustments that are available, the larger the reticle will be.

The reticle size is normally shown in millimeters on the front or rear of the sight and can be read off from the scale printed on sight.

The step to determining the reticle size of sight is to find the elevation adjustment range of the sight. You may have to check the sight manual to find this information.

How to use the ATN night vision scope

The ATN night vision scope is a powerful device that will allow you to see through the dark with amazing clarity. You can also use it in conjunction with the flashlight to illuminate your area of interest.

To use it, simply pull out the lens and turn on the power switch. You can then point the scope in the direction you want to look. The screen will illuminate and display whatever you are looking at. If you do not wish to use the scope in this manner, simply turn it off and keep it in the closed position.

How to make your night vision scope better

There are a few things you can do to make your night vision scope better. One is to get a better objective lens. The objective lens is the part of the night vision scope that collects light and sends it to your eye. A better objective lens will allow you to see in low light conditions better.

FAQ’s

What is the best way to sight in an ATN Night Vision Scope?

The best way to sight in an ATN Night Vision Scope is to place it in the reticle pattern and adjust it until you see a red dot in the center of the crosshairs.

How do I remove the ATN Night Vision Scope from my rifle?

To remove the ATN Night Vision Scope from your rifle, simply press the button located at the bottom of the scope. It will pop off and out of the side of the receiver.

What should I do if the ATN Night Vision Scope gets dirty?

The easiest way to clean the ATN Night Vision Scope is to wipe it down with a clean cloth.

What is the difference between a red dot sight and an ATN Night Vision Scope?

Red dots are usually used in rifles, but ATN Night Vision Scopes are used in handguns.

Conclusion

A night vision scope is an amazing tool that allows you to see things that would otherwise be invisible. Whether you’re hunting, hiking, camping, or fishing, a night vision scope will make your life easier.

However, you need to know how to sight in your scope before you start taking advantage of its benefits. Otherwise, you might not be able to see well enough to be effective.

In the above article, we discussed the steps of sighting in your night vision scope. Once you’re done, you’ll be ready to enjoy all the benefits this awesome piece of equipment has to offer.